Leatherworking Machine
About
The leather working machine was originally targeted at shoe repair, but is capable of working with many other leather projects. The following document describes the main parts of the machine: Universal Patcher Parts.pdf
To operate correctly several setup actions must be performed.
First, the crank must be installed as shown (this should already be done – this info is in case it needs to be re-installed for maintenance).
Second, a needle of the proper size must be selected:
and third, the shuttle timing must be correct:
Safety
Important safety information.
- Keep your fingers away from the needle!
Materials
Textiles, especially leather
Power and Speeds
—
Tips and Tricks
There is a folder with tips / tricks and helpful information about this machine located in a manila folder in the desk drawer by the window. Extra needles, bobbins and threader located in the drawer under the machine.
The following manuals may be helpful: Media:29K_Operators_Guide.pdf
Media:Singer_29K_Instructions.pdf
Media:Singer_29U_manual.pdf
In addition, the following videos and websites may be helpful: Bobbin Threading Video
Another Bobbin Threading Video
Alignment Diagram
Capability and Threading
Notes
—
Member Projects
No projects have been added for this equipment. Why don't you make one?
Owner: Fox.Build
Manufacturer: Fisters
Serial # ---
Website:
Instructions:
Replacement Cost: $199
Size/Volume: ---