Anycubic Kobra S1 3D Printer
About
To Print on the Kobra S1, First, Slice the STL File
- Open the Slicer (Anycubic Slicer Next – available here)
- Add the STL you want to print (drag-and-drop works)
- Rotate your work so it is sits the way you want it to be printed. (Deep subject)
- Adjust the printer settings if needed. (material type, colors, infill ratio etc.)
- Slice the parts and export the .gcode. Save it to somewhere convenient.
Print the Part
- You can copy the .gcode file to a USB stick, or connect over the Fox.Build Network
- If you use the network you can start the print directly from the slicer
- If you choose the USB option use the screen on the printer to start the print
Safety
The heated bed can be very hot – use care removing printed items.
Materials
PLA, PLA+, PETG
Power and Speeds
—
Tips and Tricks
—
Notes
—
Member Projects
No projects have been added for this equipment. Why don't you make one?
Owner: Fox.Build
Manufacturer: Anycubic
Serial # ---
Website:
Instructions:
Replacement Cost: ---
Size/Volume: 350x350x350mm Build Volume